Description
【 Friendly reminder: such as car stickers 】
1, in the decision to dress up the car a week before do not wax, wax will make the sticker stick; The film can not be pasted when the car is hot, the car must be cleaned, and the car can not be washed within a week after pasting, and it is recommended not to be sun-dried within 24 hours after pasting. Do not wash the car within three days after pasting, do not stick in rainy days, this effect will not be good
2, if the sticker needs to be pasted on the door crack or other places that need to be moved, do not worry, cut it with a sharp knife after pasting.
3, if you really do not want to do it, please go to the local solar film place to ask for help.
【 How to clear 】
Gently scrape the edge of the sticker with your fingernail and remove it completely without leaving any marks or damaging the paint. In winter, if it is too cold to scrape the corners, a hairdryer can be used to glue the paper
After proper heating, it can be easily removed after melting and softening.
Note:
1. The pictures are for reference only. The actual product shall prevail.
2.Please refer to measurement. Slight measurement errors (1-3cm ) are allowed within the normal range.
3.There may be a slight color difference due to the monitor, camera or other factors, please refer to the actual product.
4.If you are satisfied with the product, please leave us a 5-star praise, contact us if you have any questions.
5.Follow the store, you can receive fan special coupons, come to follow the store!
P***s –
Perfect vinyl Film. A good dimension that allows you to tous the lights of a motorbike. Small tutorial: 1: clean the surface using window cleaner and paper newspaper (no fiber microphone). 2: Cut out the vignile with a margin of at least 5 cm, lay it flat and heat it with a hair dryer to keep it flat. 3: Put window cleaner on the surface, lay the vinyl by sliding it over the entire surface. 4: Remove the vinyl and let it dry pendant you clean the surface, it should be dry, the vinyl should be wet. 4: heat the vinyl with a hair dryer (you must be able to leave your hand in front of the hair dryer for a few seconds without getting burned). 5: place an edge of the vinyl on the body (close to the surface to be covered). 6: once this edge stick well heat and pull on the vinyl with the arms of your hands on the whole surface as if you want to lay a comforter on a bed (plus easy to two but do alone).